NetComm Videotron 3G39W-V User Manual page 22

WAN Failover Backup
The WAN Failover Backup feature of the 3G39W-V is designed to provide a backup 3G Internet connection in case your primary
connection should fail. To use this feature, you will need both an Ethernet WAN connection (from an xDSL modem/ISDN/Satellite
etc) and a 3G WAN connection.
To set up WAN failover on your 3G39W-V, first tick ‚Enable automatic 3G backup‛, then fill in the fields that appear.
NAME
Automatic 3G Backup
3G NAT
Interface Metric
Internet Host
Second Address
Click' Apply' to save the settings.
YML39W-VX
www.netcomm.com.au
Figure 18 - Advanced View - WAN Failover Settings
Default setting is ‚Disable‛. Set it to ‚Enable‛ if you intend to turn on the Automatic 3G Backup
function.
Enable NAT on the 3G connection
The default value is 20; please enter the valid value from 1 to 9999 suitable for your network
environment
Enter an Internet address here to check the Internet Connection. The default value is
www.netcomm.com.au.
Enter an Internet address here to check the Internet Connection. This should be a high
availability address. For example: www.google.com
Table 16 - Advanced View - WAN Failover Settings
Videotron – 3G39W-V
DESCRIPTION
3G39W-V User Guide
22