Management Console - NetComm Videotron 3G39W-V User Manual

Management Console

Basic Status Overview
The basic status page provides basic system related information. It is shown after logging in to the 3G39W-V, and can also be
accessed by selecting Basic Status from the menu.
The status page shows the 3G connection status, Signal Strength (dBm) and SIM Status.
Internet
The 3G Operation Mode can be configured on this page. This allows for automatic failover to be configured if desired. Please see
the table below for options allowed for the 3G operation mode:
OPTION
'Always ON'
'OFF'
'Automatic 3G Backup'
YML39W-VX
www.netcomm.com.au
Figure 9 - Basic View – Status
Figure 10 - Basic View - Internet
Enables the 3G internet connection and, does not disconnect, even if idle.
The 3G39W-V will not connect to the Internet
The Automatic 3G Backup feature of the 3G39W-V is designed to provide a backup 3G Internet connection
when you use the WAN connection as your primary, when the primary fails. The Internet connection will
automatically switch back to your WAN connection once your WAN Internet connection is back online. To use
this feature, you will need both an Ethernet WAN connection (from an xDSL modem/ISDN/Satellite etc) and a
3G connection. To configure your WAN settings according to your network environment, please switch to
advanced view ‚Internet Settings‛ then select ‛WAN‛.
Table 9 - Basic View - Internet Settings
DEFINITION
Videotron – 3G39W-V
3G39W-V User Guide
14