Table of Contents
Advertisement
LAN
LAN functionality of the 3G39W-V can be configured from this page. Using this page, a user can change the LAN Subnet, gateway
IP address, DHCP settings, Static DHCP Lease settings, and many others.
NAME
IP Address
Netmask
LAN 2
LAN 2 IP Address
LAN2 Subnet Mask
DHCP Type
Start IP Address
End IP Address
Netmask
Primary DNS Server/ Secondary DNS Server
Gateway
Lease Time
Statically Assigned
802.11d Spanning Tree
LLTD
IGMP Proxy
UPnP
Router Advertisement
PPPoE relay
DNS Proxy
Click 'Apply' to save the settings.
3G39W-V User Guide
23
Figure 19 - Advanced View - LAN Settings
The local IP address of 3G39W-V
The subnet mask for the local network.
Used to configure a secondary LAN IP Address (optional)
The local IP address of the secondary LAN IP Address
The subnet mask of the secondary IP Address
Please leave this set to ‚Server‛ unless you have another DHCP server on the same network.
The Start IP address of your DHCP IP Pool.
The End IP address of your DHCP IP Pool.
The subnet mask of the IP Address
This Feature allows you to manually assign DNS Servers
The default is the IP of your 3G39W-V
DHCP Lease time of the DHCP Client of your 3G39W-V
This feature allows you to statically assign IP addresses to the MAC Addresses. The Format of
MAC address is XX:XX:XX:XX:XX:XX
The default is ‚Disable‛, select ‚Enable‛ to enable this feature.
Link Layer Topology Discovery (LLTD). The default is ‚Disable‛, select ‚Enable‛ to enable this
feature.
Internet Group Management Protocol (IGMP), The default is ‚Disable‛, select ‚Enable‛ to
enable this feature.
Universal Plug and Play (UPnP), The default is ‚Enabled‛, select ‚Disable‛ to disable this
feature.
The default is ‚Disable‛, select ‚Enable‛ to enable it.
The default is ‚Disable‛, select ‚Enable‛ to enable it.
The default is ‚Enable‛, select ‚Disable‛ to disable it.
Table 17 - Advanced View - LAN Settings
DESCRIPTION
YML39W-VX
www.netcomm.com.au
Advertisement
Table of Contents
