NetComm Videotron 3G39W-V User Manual page 17

Internet Settings
WWAN
This page allows you to setup your WWAN (Wireless Wide Area Network) connection.
OPTION
Profile Name
APN
3G NAT
Interface Metric
Operation Mode; There are 3 Options:
'Always ON'
'OFF'
'Automatic 3G Backup'
Data Roaming
PIN
Confirm PIN
Remember PIN
PIN Protection
3G39W-V User Guide
17
Figure 13 - Advanced View – WWAN Settings
Description for the profile
Please enter the APN name you wish to connect to in this field. Please don't edit this unless you are aware of
what effect it will have.
Enabled by Default, this option allows you to switch NAT (Network Address Translation) on or off.
This field allows you to customize the metric of the 3G interface. This setting will have no effect for most users,
but may be required for advanced routing configurations (Static Routes, RIP, VPN, etc)
Keeps the Internet connection alive, does not disconnect
Does not connect to the Internet
The Automatic 3G Backup feature of the 3G39W-V is designed to provide a backup 3G Internet connection
when you use the WAN connection as your primary, when the primary fails. The Internet connection will
automatically switch back to your WAN connection once your WAN Internet connection is back online. To use
this feature, you will need both an Ethernet WAN connection (from an xDSL modem/ISDN/Satellite etc) and a
3G connection.
Select to enable or disable data roaming on your 3G connection
Enter the PIN for your SIM card here (if required)
Re-enter the PIN for your SIM card here (If required)
Set the 3G39W-V to remember the SIM PIN. This prevents it needing to be entered each time the 3G39W-V
starts up.
Select to enable or disable PIN protection on your SIM card
Table 11 - Advanced View - Internet Settings
DEFINITION
YML39W-VX
www.netcomm.com.au