Advertisement
ASSEMBLY
OS AXLE BRACE MOUNTING
The open stow axle braces are to be mounted under the rear axle of the tractor. The other
end of the axle brace mounts on the outside of the lower rear corners of the mainframe. After
attaching the boomrest, it should fit tightly and level under the tractor. Attach the axle brace(s) to
the mainframe with hardware shown in the Parts Section and tighten. Attach the axle braces to
the rear axle using the mounting hardware shown in the Parts Section, but DO NOT tighten.
OS BOOMREST MOUNTING
Carefully raise the open stow boomrest and align the holes with those of the axle brace. Now
install all attaching hardware, as shown in the Parts Section, loosely, to allow for the alignment
with the left and right axle brace. Tighten / torque all hardware on the brace and the boomrest.
Finally, add the boomrest plate to the boomrest as shown in the Parts Section.
(ASM-JD-0246)
Assembly Section 2-24
Advertisement
