Advertisement
CONNECTING OR DISCONNECTING IMPLEMENT SAFETY
TO AVOID SERIOUS INJURY OR DEATH FROM BEING CRUSHED BY TRACTOR OR
IMPLEMENT:
WHEN connecting mower head to the boom
•
KEEP BYSTANDERS AWAY from tractor and mower.
•
Ensure there is enough room to lift and swing the boom with out hitting objects
BEFORE
connecting and disconnecting the mower head or boom:
•
STOP TRACTOR ENGINE, place transmission into park, engage parking brake and remove key.
WHEN
connecting and disconnecting the mower head or boom:
•
DO NOT crawl or walk under raised mower head or boom.
WHEN CONNECTING IMPLEMENT DRIVELINE:(If equipped)
TO AVOID
implement driveline coming loose during operation:
•
LUBRICATE yoke spring locking collar to ensure it freely slides on PTO shaft.
•
SECURELY seat yoke locking balls in PTO shaft groove.
•
PUSH and PULL DRIVELINE on both the tractor and implement PTO SHAFTS to ensure it is SECURELY
ATTACHED.
TO AVOID
broken driveline during operations:
•
CHECK driveline for proper length between PTO shaft and implement gearbox shaft.
Section)
•
Drivelines too short can pull apart or disengage.
•
Drivelines too long can bottom out.
•
Bottoming driveline telescoping assembly will stop sliding and become solid.
•
Driveline bottoming can push through support bearings and break off PTO shaft.
CONTACT DEALER
if implement driveline does not match Tractor PTO shaft:
•
DO NOT USE PTO ADAPTER.
Using a PTO adapter can cause:
•
Excessive vibration, thrown objects, blade and implement failures by doubling operating speed.
•
Increased working length exposing unshielded driveline areas and entanglement hazards.
BOOM
© 2015 Alamo Group Inc.
SAFETY
:
(Refer to Instructions in Operation Section)
Safety Section 1-5
(Refer to Instructions in Operation
PN CDBM-01
Advertisement
