Operating And Setting The Temperature - Caple WI3122 Instruction Manual

OPERATING YOUR WINE CABINET
Please use the cabinet within ambient temperatures between 16-32ºC, if the
ambient temperature is higher or lower than this, it will cause the temperature to
fluctuate in the cabinet, possibly preventing it from reaching 5-18ºC.
SETTING THE TEMPERATURE
To set the temperature, connect the power cord to a properly grounded outlet. In
the event of a power interruption, the previous temperature setting is automatically
erased and it will default to a preset temperature setting of 12°C
Set the desired cooling temperature by pressing the buttons adjacent to the /
indicators. Each press of the buttons will scroll through the available temperature
settings in increments of 1°C.
The temperature setting can be adjusted from 5°C to 18°C
To view the actual temperature at anytime press and hold the temperature
adjustment button (up or down) for approximately 5 seconds, the actual
temperature will temporarily flash in the LED display for 5 Seconds. After this it will
revert back to the set temperature.
Flashing LED = Cabinet temperature
Steady LED = Set temperature
NOTE
If the unit is unplugged, power lost or turned off, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to restart before this time delay, the wine
cabinet will not start.
When you use the wine cabinet for the first time or you restart the cabinet after
having been shut off for a long time, there could be a few degrees variance
between the temperature you select and the one indicated on the LED readout. This
is normal and it is due to the length of the activation time. Once the wine cabinet
has been running for a few hours everything will be back to normal.
Please keep this instruction manual for future reference
10 Instruction manual Wi3122 & Wi3122WH
Wi3122_Wi3122WH Wine Cabinet manual.indd 10 24/10/2016 10:05