Using The Shelves - Caple WI3122 Instruction Manual

Internal light
In order to reduce energy consumption, the LED light within this wine cabinet will
automatically switch off after 10 minutes. If you would prefer the LED light to
remain on continuously, this is possible. Please press and hold the "LIGHT" button
for 5 seconds, the display will show "LP". After 4 seconds the display will revert
back to normal and the light will remain on until manually switched off.
Internal light
If you would like to revert back and conserve energy (recommended), press and
In order to reduce energy consumption, the LED light within this wine cabinet will automatically
switch off after 10 minutes. If you would prefer the LED light to remain on continuously, this is
hold the "LIGHT" button for 5 seconds, the display will show "LF". After 4 seconds
possible. Please press and hold the "LIGHT" button for 5 seconds, the display will show "LP". After
the display will revert back to normal, and the light will automatically switch off
4 seconds the display will revert back to normal and the light will remain on until manually switched
off.
after 10 minutes.
If you would like to revert back and conserve energy (recommended), press and hold the "LIGHT"

USING THE SHELVES

button for 5 seconds, the display will show "LF". After 4 seconds the display will revert back to
normal, and the light will automatically switch off after 10 minutes.
To prevent damaging the door gasket, make sure to have the door opened fully
when pulling shelves out of the rail compartment.
Using the shelves
To prevent damaging the door gasket, make sure to have the door opened fully when pulling
For easy access to the storage content, you must pull the shelves approximately 1/3 •
shelves out of the rail compartment.
out of the rail compartment, however this unit was designed with a notch on each
For easy access to the storage content, you must pull the shelves approximately 1/3 out of the rail
•
sides of the shelf tracks to prevent bottles from falling.
compartment, however this unit was designed with a notch on each sides of the shelf tracks to
prevent bottles from falling.
Removing or installing shelves
Removing or installing shelves
To install or remove a shelf, tilt the shelf as per the diagram and simply pull out, or
To install or remove a shelf, tilt the shelf as per the diagram and simply pull out, or push in
•
push in the shelf until it sits on the support brackets securely.
the shelf until it sits on the support brackets securely.
Visit our Caple website to view a 'How to video' on this. www.caple.co.uk
•
Visit our Caple website to view a 'How to video' on this. www.caple.co.uk
Please keep this instruction manual for future reference
12 Instruction manual Wi3122 & Wi3122WH
Wi3122_Wi3122WH Wine Cabinet manual.indd 12 24/10/2016 10:05