Control Panel - Caple WI3122 Instruction Manual

Control panel

Control panel
CONTROL PANEL
Indicator light illuminates to signify the cooling mode is currently in operation
" "
•
Indicator light illuminates to signify the cooling mode is currently in operation.
Button
" "
•
Used to switch the internal light on/off
Indicator light illuminates to signify the cooling mode is currently in operation.
" "Button
•
Button
Used to switch the internal light on/off.
" "Button
•
To switch the appliance on/off
Used to switch the internal light on/off.
(press and hold this buttons for approximately 3 seconds)
" " Button
•
minates to signify the cooling mode is currently in operation.
To switch the appliance on/off
Button
" " Button
•
Used to raise the temperature in 1ºC increments
To switch the appliance on/off
" " Button
•
e internal light on/off.
Button
Used to raise the temperature in 1ºC increments.
" " Button
•
Used to lower the temperature by in 1ºC increments
minates to signify the cooling mode is currently in operation.
Used to raise the temperature in 1ºC increments.
" " Button
(press and hold this buttons for approximately 3 seconds).
•
liance on/off
Used to lower the temperature by in 1ºC increments.
" " Button
•
e internal light on/off.
ode is currently in operation.
ode is currently in operation.
Used to lower the temperature by in 1ºC increments.
Setting the temperature
temperature in 1ºC increments.
Setting the temperature
(press and hold this buttons for approximately 3 seconds).
liance on/off
To set the temperature, connect the power cord to a properly grounded outlet. In the
•
e temperature by in 1ºC increments.
a power interruption, the previous temperature setting is automatically erased and it wi
To set the temperature, connect the power cord to a properly grounded outlet. In the even
•
to a preset temperature setting of 12°C
a power interruption, the previous temperature setting is automatically erased and it will de
temperature in 1ºC increments.
erature
his buttons for approximately 3 seconds).
his buttons for approximately 3 seconds).
to a preset temperature setting of 12°C
Set the desired cooling temperature by pressing the buttons adjacent to the "
•
indicators. Each press of the buttons will scroll through the available temperature settin
erature, connect the power cord to a properly grounded outlet. In the event of
Set the desired cooling temperature by pressing the buttons adjacent to the "
e temperature by in 1ºC increments. •
increments of 1°C.
ion, the previous temperature setting is automatically erased and it will default
indicators. Each press of the buttons will scroll through the available temperature settings in
erature setting of 12°C
increments of 1°C.
erature
The temperature setting can be adjusted from 5°C to 18°C
•
cooling temperature by pressing the buttons adjacent to the "
nts.
nts.
The temperature setting can be adjusted from 5°C to 18°C
•
erature, connect the power cord to a properly grounded outlet. In the event of
To view the actual temperature at anytime press and hold the temperature adjustment b
press of the buttons will scroll through the available temperature settings in
•
ion, the previous temperature setting is automatically erased and it will default
C. (up or down) for approximately 5 seconds, the actual temperature will temporarily flash i
To view the actual temperature at anytime press and hold the temperature adjustment butto
•
erature setting of 12°C
LED display for 5 Seconds. After this it will revert back to the set temperature.
(up or down) for approximately 5 seconds, the actual temperature will temporarily flash in the
e setting can be adjusted from 5°C to 18°C
Flashing LED = Cabinet temperature
d to a properly grounded outlet. In the event of
d to a properly grounded outlet. In the event of
LED display for 5 Seconds. After this it will revert back to the set temperature.
cooling temperature by pressing the buttons adjacent to the "
Steady LED = Set temperature
setting is automatically erased and it will default
setting is automatically erased and it will default
Flashing LED = Cabinet temperature
press of the buttons will scroll through the available temperature settings in
al temperature at anytime press and hold the temperature adjustment button
Steady LED = Set temperature
C.
approximately 5 seconds, the actual temperature will temporarily flash in the
Seconds. After this it will revert back to the set temperature.
ng the buttons adjacent to the "
ng the buttons adjacent to the "
e setting can be adjusted from 5°C to 18°C
Note
Cabinet temperature
Wi3122_Wi3122WH Wine Cabinet manual.indd 11
hrough the available temperature settings in
(press and hold this buttons for approximately 3 second
(press and hold this buttons for approximately 3 seconds).
Instruction manual Wi3122 & Wi3122WH
/ "
/ "
/
Please keep this instruction manual for future reference /
/
/
"
"
11
24/10/2016 10:05