Operating And Setting The Temperature - Caple WI3124 Instruction Manual

OPERATING YOUR WINE CABINET
Please use the cabinet within ambient temperatures between 16-32ºC, if the
ambient temperature is higher or lower than this, it will cause the temperature to
fluctuate in the cabinet, possibly preventing it from reaching 5-18ºC.
SETTING THE TEMPERATURE
Set the desired cooling temperature by pressing the / keys. Each press of the
keys will scroll through the available temperature settings in increments of 1°C.
The temperature setting can be adjusted from 5°C to 18°C
To view the actual temperature at anytime press and hold either / for
approximately 5 seconds, the actual temperature will temporarily flash in the LED
display for 5 Seconds. After this it will revert back to the set temperature.
Flashing LED = Cabinet temperature
Steady LED = Set temperature
NOTE
If the unit is unplugged, power lost or turned off, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to restart before this time delay, the wine
cabinet will not start.
When you use the wine cabinet for the first time or you restart the cabinet after
having been shut off for a long time, there could be a few degrees variance
between the temperature you select and the one indicated on the LED readout. This
is normal and it is due to the length of the activation time. Once the wine cabinet
has been running for a few hours everything will be back to normal.
Please keep this instruction manual for future reference
10 Instruction manual Wi3124 & Wi3124WH
Wi3124_Wi3124WH Wine Cabinet manual.indd 10 29/08/2018 09:30