Table of Contents
Advertisement
Operating your wine cabinet and setting the temperature
Please use the cabinet within ambient temperatures between 5-32
temperature is higher or lower than this, it will cause the temperature to fluctuate in the
cabinet, possibly preventing it from reaching 5-18
Control panel
"
"
•
Indicator light illuminates to signify the cooling mode is currently in operation.
"
"Button
•
Used to switch the internal light on/off.
"
" Button
•
To switch the appliance on/off
"
" Button
•
Used to raise (warm) the temperature in 1 ºC increments.
"
" Button
•
Used to lower (cool) the temperature by in 1 ºC increments.
Setting the temperature
To set the temperature, connect the power cord to a properly grounded outlet. In the event of
•
a power interruption, the previous temperature setting is automatically erased and it will
default to a preset temperature setting of 12°C
Set the desired cooling temperature by pressing the buttons adjacent to the "
•
indicators. Each depression of the buttons will scroll through the available temperature
settings in increments of 1°C.
The temperature setting can be adjusted from5°C -18°C
•
To view the actual temperature at anytime press and hold the temperature adjustment button
•
(up or down) for approximately 5 seconds, the actual temperature will temporarily flash in the
LED display for 5 Seconds. After this it will revert back to the set temperature.
Flashing LED = Cabinet temperature
Steady LED = Set temperature
ºC
(press and hold this buttons for approximately 3 seconds).
, if the ambient
ºC
.
/
"
5
Advertisement
Table of Contents
