Head Cushion Snaps; Test The Regulator For Proper Function - Kirby Morgan 525-769 Installation Manual

Test the regulator for proper function

1.2.8 Head Cushion Snaps

1. Install the two snap tabs adjacent to the swing
catch assembly.
1.3 Test the regulator for proper
function
When checking the regulator by depressing
the purge button, the regulator may free
flow without back pressure inside of the oral
nasal. This is completely normal. Placing a
finger or hand over the outlet tube of the
regulator will prevent free flow.
NOTE
See "1.2.2 Adjusting the 455 Balanced
Regulator" on page 455BAL-3 in module 455
Balanced Regulator for proper adjustment.
For all maintenance and adjustment
procedures, refer to the 455 Balanced
Regulator module found in the "Manuals and
Exploded Views" link under the "Support"
NOTE
link at www.kirbymorgan.com.
© MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210607001
Head Cushion Snaps
31