Low Pressure High Flow Hose; Manifold Block; Tool Kit & Pouch; Regulator Mount Nut Tools - Kirby Morgan EXO original Operation & Maintenance Manual

Chapter 1

1.4.4 Low Pressure High Flow Hose

A low pressure high flow hose for the EXO-26
or EXO-BR is available. This hose will deliver
the maximum amount of air to the regulator.
Order DSI Part #: 255-050, LP High Flow Hose.

1.4.5 Manifold Block

If you use the EXO for
surface supplied div-
ing, a manifold block
which has a one way
valve and provides for
correct attachment of the
umbilical is essential. The
emergency valve on the manifold block also
controls the flow of the bailout supply.
Order DSI Part #:
300-145 9/16" SCUBA fitting on one way valve
300-150 9/16" oxygen fitting on one way valve
300-155 #6 JIC fitting on one way valve
1.4.6 Tool Kit & Pouch
A special tool kit and
pouch are available to store
the back up wrench and
regulator adjustment tool.
Order DSI Part #: 325-630,
Tool Kit & Pouch

1.4.7 Regulator Mount Nut Tools

These tools are used for removing and replacing the regulator assembly. The mount nut tool
works on the newer EXO-Standard and EXO-BR as well as the EXO-26's with the original style
regulator mount nuts. These tools are required if an entire regulator rebuild or face seal replace-
ment is to be attempted. These two procedures, entire regulator rebuild and face seal replace-
ment, can be difficult. DSI recommends that these two procedures be done by a factory
trained DSI dealer. If you are unsure if your local dealer is qualified to do this repair, call
DSI for the nearest qualified dealer in your area.
Order DSI Part #: 325-650 Deluxe Tool Kit
325-630
Tool Kit & Pouch
EXO Full Face Mask Manual

1.4.8 Face Cushion Kit

A face cushion kit for the EXO-26 and EXO-
BR is available. While the majority of owners
find the mask provides a watertight seal right
out of the box, some divers with small or nar-
row faces may experience trouble getting a com-
fortable, tight seal. This optional cushion is de-
signed to give divers with smaller faces a better
seal. It is easily installed to the interior of the
mask. Two velcro tabs secure the cushion in-
side the seal, with the ends of the cushion slipped
into the earphone pockets.
Order DSI Part #: 325-025, Face Cushion Kit
The EXO Face Cushion Kit
325-650 Deluxe Tool Kit
7