Module Programming; Special Installer Functions - DSC PC5008 Installation Manual

P R O G

Module Programming

[801] PC5400 Printer Module Programming
Please refer to your PC5400 Installation Manual for installation and programming instructions.
[802] PC59XX Audio Interface Programming
Please refer to your PC59XX Installation Manual for installation and programming instructions.
[803] LINKS2X50 Long Range Radio Interface Programming
Please refer to your LINKS2150 Installation Manual for installation and programming instructions.
[804] PC5132 Wireless Expansion Programming
Please refer to your PC5132 Installation Manual for programming locations and instructions.

Special Installer Functions

[901] Installer Walk Test Mode Enable / Disable
[902] Module Supervision Reset
[903] Module Supervision Field
[904] Wireless Module Placement Test
For more information, please refer to your PC5132 Installation Manual
• Select the module / transmitter (Zones 01-8).
• Press [#] to Cancel.
Placement
Good
Fair
Bad
[990] Installer Lockout Enable
[991] Installer Lockout Disable
[993] Restore LINKS2X50 Factory Default Programming
[995] Restore Escort5580 Factory Default Programming
[996] Restore PC5132 Factory Default Programming
[997] Restore PC5400 Factory Default Programming
[998] Restore PC59XX Factory Default Programming
[999] Restore PC5008 Factory Default Programming
R A M M I
(Section 2.7 "Removing Modules")
(Section 2.6 "Supervision")
Led Keypad
Light 1 ON Steady
Light 2 ON Steady
Light 3 ON Steady
(Section 5.31 Installer Lockout")
(Section 5.31 "Installer Lockout")
N G W O
(Section 5.32 "Walk Test [Installer]")
LCD Keypad
"GOOD"
"FAIR"
"BAD"
(Section 5.30 "Resetting Factory Defaults")
(Section 5.30 "Resetting Factory Defaults")
(Section 5.30 "Resetting Factory Defaults")
(Section 5.30 "Resetting Factory Defaults")
(Section 5.30 "Resetting Factory Defaults")
(Section 5.30 "Resetting Factory Defaults")
42
R K S H E
Bell / Buzzer
1 Beep / Squawk
2 Beeps / Squawks
3 Beeps / Squawks
E T S