Table of Contents
Advertisement
[Manual mode]
Under the manual mode, the material sensor is disabled. Under this mode, the sewing machine is oper-
ated with the pedal or the hand thread trimming switch.
Depress the back part of the pedal to lift the presser foot.
Depress the pedal to start sewing.
When you press the hand switch, the sewing machine rotates and the suction device operates. (Only for
the DD22 model)
When you press the hand switch, the chain-off thread cutter and the suction device operate. (Only for the
DD23 model)
* In accordance with the setting on the operation panel, the thread trimmer operates when you depress the
back part of the pedal. (For the DD22 model, the sewing machine rotates.)
* In the case the parameter "P036 Thread trimming by depressing back-part of pedal" is set to "1: With
thread trimming", the sewing machine carries out thread trimming operation when you depress the back
part of the pedal.
– 63 –
Advertisement
Table of Contents
