Backlight - JUKI MO-6800S/DD20 Series Instruction Manual

6-12. Backlight

Brightness of the backlight for the operation panel LCD can be set.
It is also possible to set the time to turn OFF the LCD backlight when the operation panel is left without any
operation for a predetermined time period.
While the backlight is OFF, the sewing machine will not be able to perform sewing even if you operate it
(including the pedal switch and hand switch).
When the time to output the audio guidance is reached, the audio guidance is given even if the backlight
is OFF as usual.
The backlight for the operation panel lights up only when you press any of the switches on the operation
panel to allow the sewing machine to return to the normal mode.
The sewing machine does not react to the switch that you press at the time of resetting.
If an error occurs while the backlight is OFF, the backlight will be turned ON to display the error screen.
The sewing machine may be returned to the normal mode depending on the type of the error.
A
❶ ❷
B
❶ ❷
1) Call the function setting number J10 referring to
3. Function setting" p.32
the backlight can be set (function setting No. J10).
J06 1: Dark
2: Medium
3: Bright
❷ to confirm the brightness of the
Press
backlight. The backlight brightness is changed
over to the confirmed setting immediately after the
screen is restored to the function setting screen.
❶ if you want to cancel this procedure
Press
and return to the function setting screen.
2) Call the function setting number J11 referring to
3. Function setting" p.32
elapsed before turning OFF the backlight when the
operation panel is left without any operation can be
set (function setting No. J11).
J11 0: Backlight is not turned OFF
Setting range: 1 - 250 minutes
❷ to confirm the backlight turn-off time.
Press
❶ if you want to cancel this procedure
Press
and return to the function setting screen.
– 60 –
"6-
(A). The brightness of
"6-
(B). The time to be