JUKI MO-6800S/DD20 Series Instruction Manual page 46

Function setting No. P026: It is possible to select either the semi-automatic mode or the free stitching
mode with this function setting number.
Under the free stitching mode, the sewing machine will not stop as long as the front part of the pedal is
held depressed after the completion of thread trimming.
P026:
While the free stitching mode is selected, any of
eration panel.
[Simplified list]
This list indicates the setting method and function of the main parameters with respect to sewing modes.
Refer to the function setting list for the parameters that are not included in this simplified list.
Sewing mode
Operation panel display
P018: Full automatic / Semi-
automatic mode
P020: Automatic sensor ON/
OFF
P26: Free stitching ON/OFF
P21: Front sensor ON/OFF
Start of sewing
End of DD22
sewing
DD23
Pedal
operation
0: OFF (Semi-automatic)
1: ON (Free stitching)
Full Semi
automatic automatic
1：Full 0：Semi
automatic automatic
1：ON 1：ON
ー
0：OFF
1：ON 1：ON
0：OFF 0：OFF
*1
Front Front
sensor *2 sensor +
Pedal
Intermediate Intermediate
sensor sensor
Rear sensor Rear sensor
Depressing Neutral
on the back position
part of pedal
C, D and
Free
Manual
stitching
No display
ー
0：Semi
automatic
0：OFF 1：ON
ー
1：ON
1：ON 1：ON
0：OFF 0：OFF
Pedal Front
sensor +
Pedal
ー ー
ー ー
Neutral Neutral
position position
– 43 –
E is not displayed on the op-
Remarks
Function is not changed
over under the manual
mode.
Under the full automatic
mode and the manual
mode, free stitching
function is not changed
over.
*1 If the front sensor is
set to "OFF", the sewing
machine operation will be
disabled.
*2 If the "P017: One shot"
is changed to "0: OFF",
the sewing machine can
be started only with the
front sensor.
Under the manual mode
or the free stitching
mode, the sewing
machine is operated with
the pedal instead of the
sensor.