Installation Using The Web Browser - Fronius Symo GEN24 3.0 Operating Instructions Manual

3
4
5
The network wizard and the product setup can be carried out independently of each oth-
er. A network connection is required for the Solar.web installation wizard.
Installation using WLAN:
the web browser
1
2
3
4
5
6
The network wizard and the product setup can be carried out independently of each oth-
er. A network connection is required for the Solar.web installation wizard.
Ethernet:
1
2
3
4
5
The network wizard and the product setup can be carried out independently of each oth-
er. A network connection is required for the Solar.web installation wizard.
Open the access point by touching the sensor once
flashes blue.
Follow and complete the installation wizard in the individual sections.
Add system components in Solar.web and start up the PV system.
Open the access point by touching the sensor once
flashes blue.
Establish the connection to the inverter in the network settings (the inverter is dis-
played with the name "FRONIUS_PILOT" and the serial number of the device).
Password: enter 12345678 and confirm.
IMPORTANT!
To enter the password on a Windows 10 operating system, the link "Connect using a
security key instead" must first be activated to establish a connection with the pass-
word: 12345678.
In the browser address bar, enter and confirm the IP address 192.168.250.181. The
installation wizard is opened.
Follow the installation wizard in the individual sections and complete the installation.
Add system components in Solar.web and start up the PV system.
Establish a connection to the inverter (LAN1) with a network cable (CAT5 STP or
higher).
Open the access point by touching the sensor once
flashes blue.
In the browser address bar, enter and confirm IP address 169.254.0.180. The install-
ation wizard is opened.
Follow the installation wizard in the individual sections and complete the installation.
Add system components in Solar.web and start up the PV system.
→ Communication LED:
→ Communication LED:
→ Communication LED:
75