Cross Section Of The Ac Cable - Fronius Symo GEN24 3.0 Operating Instructions Manual

IMPORTANT!
Connect the individual conductors to an appropriate ferrule if several individual conduct-
ors are connected to one input of the push-in terminals.
WSD connections with push-in terminal
Dis-
Stripping
tance
length
max.
100 m
10 mm
109 yd
0.39 inch
Modbus connections with push-in terminal
Dis-
Stripping
tance
length
max.
300 m
10 mm
328 yd
0.39 inch
IO connections with push-in terminal
Dis-
Stripping
tance
length
max.
30 m
10 mm
32 yd
0.39 inch
LAN connections
Fronius recommends using at least CAT 5 STP (shielded twisted pair) cables and a maximum distance of
100 m (109 yd).
Cross section of For a standard M32 metric screw joint with a reducer:
the AC cable Cable diameter from 7-15 mm
When using an M32 metric screw joint (reducer removed):
cable diameter from 11-21 mm
(with a cable diameter of less than 11 mm, the strain-relief force is reduced from 100 N to
a maximum of 80 N)
With cable diameters greater than 21 mm, the M32 screw joint must be replaced by an
M32 screw joint with a larger clamping area – item number: 42,0407,0780 – strain-relief
device M32 x 1.5 KB 18–25.
46
- Copper: round, solid
- Copper: round, fine-stranded
Fine-stran-
Solid
ded
2
0.14-1.5 mm 0.14-1.5 mm
AWG 26-16 AWG 26-16
Fine-stran-
Solid
ded
2
0.14-1.5 mm 0.14-1.5 mm
AWG 26-16 AWG 26-16
Fine-stran-
Solid
ded
2
0.14-1.5 mm 0.14-1.5 mm
AWG 26-16 AWG 26-16
Fine-stran- Fine-stran-
ded with fer- ded with fer-
rules with rules without
collar
2 2
0.14-1 mm 0.14-1.5 mm
AWG 26-18 AWG 26-16
Fine-stran- Fine-stran-
ded with fer- ded with fer-
rules with rules without
collar
2 2
0.14-1 mm 0.14-1.5 mm
AWG 26-18 AWG 26-16
Fine-stran- Fine-stran-
ded with fer- ded with fer-
rules with rules without
collar
2 2
0.14-1 mm 0.14-1.5 mm
AWG 26-18 AWG 26-16
Cable recom-
mendation
collar
min. CAT 5
2
UTP (unshiel-
ded twisted
pair)
Cable recom-
mendation
collar
min. CAT 5
2
STP (shielded
twisted pair)
Cable recom-
mendation
collar
Single con-
2
ductor pos-
sible