Installation Using The Web Browser - Fronius Tauro 50-3 Operating Instructions Manual

The network wizard and the product setup can be carried out independently of
each other. A network connection is required for the Solar.web installation wiz-
ard.
Installation us- WLAN:
ing the web
browser
open access point
1
2
3
4
5
6
The network wizard and the product setup can be carried out independently of
each other. A network connection is required for the Solar.web installation wiz-
ard.
Ethernet:
1
2
3
4
5
1
Open the access point by touching the sensor
flashes blue.
Establish the connection to the inverter in the network settings (the inverter
is displayed with the name "FRONIUS_" and the serial number of the device).
Enter the password from the rating plate and confirm.
IMPORTANT!
To enter the password on a Windows 10 operating system, the link "Connect
using a security key instead" must first be activated to establish a connection
with the password.
In the browser address bar, enter and confirm the IP address
192.168.250.181. The installation wizard is opened.
Follow the installation wizard in the individual sections and complete the in-
stallation.
Add system components in Solar.web and start up the PV system.
Establish a connection to the inverter (LAN1) with a network cable (CAT5
STP or higher).
Open the access point by touching the sensor once
flashes blue.
In the browser address bar, enter and confirm IP address 169.254.0.180. The
installation wizard is opened.
Follow the installation wizard in the individual sections and complete the in-
stallation.
Add system components in Solar.web and start up the PV system.
FRONIUS_Serialnumber Rating plate
Secured
Access point
password:
Password:
XXXXXXXX
XXXXXXXX
→ Communication LED
1
open access point
192.168.250.181
2
192.168.250.180
2
→ Communication LED:
69