General; Quick-Lock System; Warning Notices On The Device - Fronius Symo GEN24 3.0 Operating Instructions Manual

General

Quick-lock sys-
tem
NOTE!
Danger when using a drill driver.
This may result in the destruction of the quick-lock system due to overtorque.
▶
▶
Warning notices Technical data, warning notices and safety symbols are affixed to the inverter. These
on the device warning notices and safety symbols must not be removed or painted over. They warn
against incorrect operation which can lead to serious injury and damage.
A 4-digit number (coded production date) is printed on the rating plate at the very bottom,
from which the production date can be calculated.
If you subtract the value 11 from the first two digits, you get the production year. The last
two digits stand for the calendar week in which the device was produced.
Example:
Value on rating plate = 3207
Use a screwdriver (TX20).
Do not turn the screws more than 180°.
A quick-lock system (3) is used to mount
the connection area cover and front cover.
The system is opened and closed with a
half-rotation (180°) of the captive screw (1)
into the quick-lock spring (2).
The system is independent of torque.
37