Knife And Scissor Sharpener; Sharpening Knives - Clarke METALWORKER CMPS1 Operation & Maintenance Instructions Manual

KNIFE AND SCISSOR SHARPENER

Using this attachment, you can sharpen any straight or curved blade but not
serrated blades.

SHARPENING KNIVES

1. Slide the knife and scissor
attachment onto the power unit.
2. Switch on the power unit.
3. Hold the knife by its handle, insert
the blade into the guide slot.
4. As soon as the blade touches the
grinding wheel, draw it across the
wheel with a light, steady pressure
towards the tip end before
removing. Do not press hard.
5. Insert the second side of the
blade into the other top guide slot
and repeat as above.
6. Repeat sharpening each side in
turn until a clean sharp edge is
attained.
7. Switch the power unit off and
ensure the grinding wheel has
stopped before removing the
sharpener attachment from the
base unit.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
9