Unpacking And Inspection - Blizzard 810SS Assembly & Operation Manual

Snowplow

Hide thumbs Also See for 810SS:

Assembly Instructions - 1999

Unpacking & Inspection

Your Blizzard Power Plow has been packaged to withstand transit and

weather related damage. Fully inspect all components upon receipt of your

plow. In the event of shipping damage or missing parts, immediately contact

our Customer Service Department toll free at 1-888-680-8600.

Begin unpacking and inspection in the following order:

1. Remove packaging slip from the end panel of the pallet cover. Retain

all documentation for your records.

Remove the polyethylene pallet cover from the crating.

All wood framing should be removed from the pallet for easy access to

the snowplow.

Due to the odd shaped components and size of several assembly parts,

various nylon ties and corrugates are used for scratch resistance and

package orientation. Please remove these items prior to assembly.

Place the main blade assembly on a flat, level surface.

Once you have inspected all parts and removed all restraining and protective

packaging materials, your snowplow is ready to be fully assembled.

Pallet Cover End Panel

The tear resistant woven polyethylene pallet cover

contains a moisture barrier to help protect all

packaged components and keep out the most

inclement weather during shipping and storage.

The plow model number and the serial number of

the snowplow attachment are given together and

can be found at the end panel. The first three

digits and two letters of the number indicated is

always the plow model (810SS) and the entire

nine digit number (810SS-0001) make up the

serial number. The packaging list is also attached

to the end panel. Be sure to retain this list for

your records.

Assem. Instructions - Unpacking & Inspection 03

Table of Contents