Blizzard 810SS Assembly & Operation Manual page 11

Storing Your Snowplow
Placing Your Plow In Storage
1. Position your plow on a flat, level surface for storage. Follow the dis-
mounting procedure illustrated on page 7.
2. Apply white lithium grease to the cylindrical connector. Clean and install
the weather cap.
3. Lubricate all exposed hydraulic cylinder rod ends with liquid white lithium
grease.
4. Touch-up all rust spots or chipped paint with white Blizzard paint. Contact
your local dealer for availability.
5. Change the hydraulic fluid in your skid steer as indicated by the mainte-
nace table in your Owner's Manual. Blizzard Corporation recommends
that the fluid in the snowplow attachment be replaced annually and the
hydraulic pump filter on the skid steer be cleaned.
6. Cover the snowplow with a tarp if stored outside. This will protect your plow
from sun fading and inclement weather which can lead to accelerated
corrosion.
Removing Your Plow From Storage
1. Perform all regular maintenance indicated on the previous page.
2. If you have not replaced the hydraulic fluid in the snowplow's hydraulic
system, it is strongly encouraged that you do so prior to operating your plow.
3. Follow the mounting procedure illustrated on page 7.
4. Once the plow has been properly mounted to the skid steer and all
electrical connections have been made, initiate all of the functions of the
snowplow. Monitor the fluid level in the skid steer periodically.
Annual Fluid Replacement
Type & Quantity of Fluid Replaced
Storing Your Snowplow 09
Date