Special Servicing Tools - Stihl BT 130 Manual

12.

Special Servicing Tools

New Special Tools
No. Part Name
1 Screwdriver T27x15x75
Existing Special Tools
No. Part Name
1 Pliers DIN 5254 - A10
2 Pliers DIN 5256 - C19
3 Screwdriver bit, T 27 x 125
4 Press sleeve
5 Assembly tool
6 Press arbor
7 Press sleeve
8 Setting gauge
9 Press arbor
10 Locking screw
11 Torque wrench
12 Torque wrench
13 Stud puller M5
Remarks:
1) Use for releasing only.
50
Part No. Application
0812 370 1004 Removing spline socket head screws
Part No. Application
0811 611 8200 Removing and installing circlips
0811 641 8380 Removing and installing circlips
0812 542 2104 Removing and installing spline socket
screws with electric or pneumatic
screwdrivers; tightening down screws
with torque wrench
1115 893 4600 Installing hot ball bearing (gearbox
cover / clutch housing), installing cold
clutch drum
1117 890 0900 Removing and instaling auger brake
spring
1117 893 7200 Removing and installing hot ball
bearing (clutch drum, gearbox housing,
gearbox cover),
oil seal, gearbox cover / ball bearing
4112 893 2401 Installing oil seal
(ignition side / starter side)
4118 890 6401 Adjusting air gap between the ignition
module and flywheel
4119 893 7200 Removing hot ball bearing (gearbox
housing and gearbox cover),
installing hot ball bearing (clutch
housing / clutch drum)
4282 890 2700 Blocking the crankshaft
5910 890 0302 0.5 to 18 Nm
5910 890 0312 6 to 80 Nm
5910 893 0510 Removing collar studs
Rem.
1)
Rem.
BT 130