Introduction And Safety Precautions; Introduction - Stihl BT 130 Manual

1.

Introduction and Safety Precautions

1.1

Introduction

This service manual contains
detailed descriptions of all the repair
and servicing procedures specific to
this power tool.
The service manual for the STIHL
Series 4180 Powerhead is also
available for servicing and repairs.
You should make use of the
illustrated parts lists while carrying
out repair work. They show the
installed positions of the individual
components and assemblies.
Refer to the latest edition of the
relevant parts list to check the part
numbers of any replacement parts.
A malfunction on the machine may
have several causes. To help locate
the problem, consult the chapter on
"Troubleshooting" and the
"STIHL Service Training System"
for all assemblies.
Refer to the "Technical Information"
bulletins for engineering changes
which have been introduced since
publication of this service manual.
Technical information bulletins also
supplement the parts list until a
revised edition is issued.
2
The special tools mentioned in the
descriptions are listed in the chapter
on "Special Servicing Tools" in this
manual. Use the part numbers to
identify the tools in the
"STIHL Special Tools" manual. The
manual lists all special servicing
tools currently available from
STIHL.
Symbols are included in the text and
pictures for greater clarity.
The meanings are as follows:
In the descriptions:
N Action to be taken as shown in
the illustration above the text
– Action to be taken that is not
shown in the illustration above
the text
In the illustrations:
A Pointer
a Direction of movement
@ 4.2 =Reference to another
chapter, i.e. chapter 4.2
in this example.
Service manuals and all technical
information bulletins are intended
exclusively for the use of properly
equipped repair shops. They must
not be passed to third parties.
Always use original STIHL
replacement parts.
They can be identified by the STIHL
part number, the { logo
and the STIHL parts symbol K
This symbol may appear alone on
small parts.
Storing and disposing of fuel,
greases and oils
Collect fuel, greases and oils in a
clean container and dispose of them
properly in accordance with local
environmental regulations.
BT 130