Tools, Servicing Aids; Rewind Starter; Special Servicing Tools, Servicing Aids; Removing The Rewind Starter - Stihl 4180 Series Service Manual

5

Rewind Starter

D5x24 (6 Nm / 53 lbf. in.)
5.1

Special Servicing Tools, Servicing Aids

Socket, T27 – 0812 542 2104
–
Torque wrench – 5910 890 0302
–
Installing tool – 5910 890 2204
–
Screwdriver, T27x200 – 5910 890 2415
–
5.2

Removing the Rewind Starter

Take out the screws (10).
N
Lift away the rewind starter.
N
5.3

Disassembling the Rewind Starter

Warning! Spring is under tension. Risk of serious eye and
face injuries. Wear a face shield and work gloves.
The spring will not be under tension if either the starter
rope or rewind spring is broken.
Pull out the rope (3) with the starter grip (1) about 20
N
cm and hold the rope rotor (5) steady.
Series 4180 Powerhead
10
9
1
2
3
3
Engage the rope (3) in the notch (arrow) in the rotor
N
and make a loop in the rope.
Use the rope to turn the rotor (5) clockwise until spring
N
tension is relieved.
Take out the screw (8) and remove it along with
N
washer (7) and pawl (6).
Remove the rope rotor (5).
N
Remove the broken/worn starter rope (3) from the
N
rope rotor (4).
Remove the rewind spring (4).
N
5.4

Replacing the Rope Guide Bushing

Remove the worn rope bushing (2) from the fan
N
housing (9).
4
5
6
7
8
8
6
7 5
9