Table of Contents
Advertisement
card number, but omit the 0 in front of it.
For example, a 3 byte number of RS232-TTL-HEX format is A83EF6, the actual output is
A83EF6, the RS232-TTL-ASCII-8 format is 168,16118, the actual output is 16816118, the
RS232-TTL-ASCII-10 format is 0011026166, the actual output is 11026166.
4.1.22.3
Set wiegand output format for reading card or pressing fingerprint
62, (26-66)#, default value is 26, the Wiegand output format for reading card or pressing
fingerprint can be set from 26-66
When pressing a valid user fingerprint, the output format is that the lower 2 bytes are the
fingerprint user ID number, and the lower 3 byte is the machine device number. If the machine
device number is 3 and the fingerprint ID is 12, the output data is equivalent to the 26-bit card
number 003,00012. If the card number in other formats is output, the high digits should be filled
with 0.
4.1.22.4
Set wiegand output parity format for reading card or pressing fingerprint
63, 0# wiegand output without parity check.
63, 1# default value, wiegand output with parity check (EO format)
Note: EO format is standard wiegand format. Even check data add in front and Odd check
data add in the end.
4.2 Admin card (or fingerprint) or PIN operation
4.2.1 Set-card (or fingerprint) operation
The main function of Set-card (or fingerprint) is to replace the input Admin Password
into the management menu operation. It is suitable for forgetting the Admin Password or
frequently entering the management menu operation. Its operation is:
Read Set-card (or fingerprint), equivalent to operation:
seconds), (Admin password) #.
Note: After reading Set-card (or fingerprint), the indicator lights are red flashing,
indicating that the management menu operation mode has been entered and other
operations can be performed.
4.2.2 Add-card (or fingerprint) operation
Read Add-card (or fingerprint), read user card (or fingerprint), read user card (or
fingerprint), .... read Add-card (or fingerprint).
Note: Add-card (or fingerprint) is mainly used for rapid continuously to add the user
Sebury Technology Co., Ltd
Standalone Access Control User Manual V1.0
18
sPress2 Fingerprint
* ( Press for more than 2
http://www.sebury.com
Advertisement
Table of Contents
