Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sebury sPress2
Summary of Contents for Sebury sPress2
- Page 1 Fingerprint Standalone Access Control User Manual V1.0...
-
Page 2: Table Of Contents
Content Overview..............................4 Introduction............................4 Function features..........................4 Functional unit............................4 Technical parameters........................5 Installation, wiring and debugging......................5 Packing list............................5 Installation and Wiring........................6 Debugging............................7 Getting Started............................7 Enter management menu operation mode...................8 Change admin password.........................8 Set controller to Single-door mode....................8 Set door opening time to 2s......................9 Add User Card or Fingerprint......................9 Exit Management menu operation mode..................9 User open door..........................9... - Page 3 4.1.21 Adjust key volume.........................14 4.1.22 Set reader output format......................14 4.1.22.1 Set facility code......................14 4.1.22.2 Set D0 & D1 output format...................14 4.1.22.3 Set wiegand output format for reading card or pressing fingerprint......15 4.1.22.4 Set wiegand output parity format for reading card or pressing fingerprint...15 Admin card (or fingerprint) or PIN operation................15 4.2.1...
-
Page 4: Overview
Infrared anti - demolition technology, can also alarm at night. The unlock signal adopts the NO, NC, COM output of the relay. Alarm signal output by MOS and it can be the driver of the alarm . Sebury Technology Co., Ltd http://www.sebury.com... -
Page 5: Functional Unit
Admin fingerprint capacity of ：21 Electric lock signal relay contact current: ≤1A Alarm signal MOS tube output current: ≤1A Working environment temperature: -20～60℃ Working environment humidity: 0～95% (no condensation) Dimension: 170*83*35mm Sebury Technology Co., Ltd http://www.sebury.com... -
Page 6: Installation, Wiring And Debugging
2.1 Packing list Item Model Note Color box sPress2 Standalone access control sPress2 User manual sPress2 Punch stickers sPress2 Decorative sheet sPress2 Expansion rubber plug Φ6mm×30 mm White Self-tapping screw ΦKA3mm×25 mm Galvanized 2.2 Installation and Wiring Sebury Technology Co., Ltd http://www.sebury.com... - Page 7 Exit button input(or external control input of buzzer) Blue Normal open port of Relay Purple Common port of Relay Orange NC Normal close port of Relay Grey Alarm- Alarm (or doorbell) signal MOS drain output Sebury Technology Co., Ltd http://www.sebury.com...
-
Page 8: Debugging
“()” means the serials of digital numbers which will be type into the controller, like PIN code, ID number ,card number Operation Conventions： “Beep-”one long beep means the operation was correct. “beep-beep-beep” three short beeps mean operation was incorrect. LED light turn to green means operation was successful. Sebury Technology Co., Ltd http://www.sebury.com... -
Page 9: Enter Management Menu Operation Mode
3.2 Change admin password 00, (New admin password) #, (Repeat new admin password)# Note: New admin password is a 6 digits number Sebury Technology Co., Ltd http://www.sebury.com... -
Page 10: Set Controller To Single-Door Mode
When the indicator light is red and always bright, read card, or press user fingerprint or press exit button. Note: When the door opens, there is a long "beep" sound and the indicator light turns to green when the door is unlocked. Sebury Technology Co., Ltd http://www.sebury.com... -
Page 11: Basic Functions
01, 6#, read card(or press fingerprint twice), …, Set 1-3 Normal-open-cards(or fingerprint). Note: Each type of admin card(or fingerprint) can be divided several times to set till to 3pcs. 4.1.3 Delete admin card(or fingerprint) 02, 0000#, delete all 21 admin cards(or fingerprint). Sebury Technology Co., Ltd http://www.sebury.com... -
Page 12: Set Machine Mode
4.1.6 Restore to default settings 09，0000# Note: After Restore to default settings, Admin Password is unchanged, Machine mode is unchanged, admin cards and user card information are not deleted, and the specific default values are shown in the appendix. Sebury Technology Co., Ltd http://www.sebury.com... -
Page 13: Add User
ID number and card number will add 1 at the same time till to all card is added. In order to prevent duplication of card numbers, please delete all user cards and admin cards before add serial number cards. Sebury Technology Co., Ltd http://www.sebury.com... -
Page 14: Delete User
If the user don’t want to use the Normal-open mode, please set the mode to the other two modes. Note: A better way to implement the Normal-open mode is operation by Normal-open card Sebury Technology Co., Ltd http://www.sebury.com... -
Page 15: Set Limits User Mode
Note: When the machine is illegally dismantled, it alarms and an alarm signal will be send out at the same time. The alarm can be canceled by inputting Admin Password, read admin card(or fingerprint) or user card(or fingerprint). Sebury Technology Co., Ltd http://www.sebury.com... -
Page 16: Set Anti-Crack Function
Press and hold on the “2” key, the brightness will continuously increase. When it reaches to the maximum brightness the controller will beep twice. 4.1.20 Set buzzer mode 54, 0#, disable buzzer. 54, 1#, default value, enable buzzer. Sebury Technology Co., Ltd http://www.sebury.com... -
Page 17: Adjust Key Volume
0 in front of it. The output RS232-TTL-ASCII-10 format is the output data is ASCII character format, card number data is 10 bit format, and same as the ordinary EM card marked on the 10 bit Sebury Technology Co., Ltd http://www.sebury.com... -
Page 18: Set Wiegand Output Format For Reading Card Or Pressing Fingerprint
4.2.2 Add-card (or fingerprint) operation Read Add-card (or fingerprint), read user card (or fingerprint), read user card (or fingerprint), ..read Add-card (or fingerprint). Note: Add-card (or fingerprint) is mainly used for rapid continuously to add the user Sebury Technology Co., Ltd http://www.sebury.com... -
Page 19: Delete Card (Or Fingerprint) Operation
4.2.7 Normal-open-card (or fingerprint) operation Read Normal-open-card (or fingerprint) once, two short beeps, lock keep open, not controlled by other unlocking action. Read Normal-open-card (or fingerprint) again, one long beep, release normal open state. Sebury Technology Co., Ltd http://www.sebury.com... -
Page 20: Users Operation
“beep”, and a long beep, admin password has restored to 888888. But the other parameters, the info of the card and fingerprint will be still kept. 4.4.3 Restore factory settings Sebury Technology Co., Ltd http://www.sebury.com... -
Page 21: Operation Characteristics In Different Machine Modes
Demo mode is the mode for Single-door mode, primarily for display purposes or without safety needed situation, as a tool to use any card (or fingerprint) to open the door. In this mode, any card (or fingerprint) can open the door without authorization. Sebury Technology Co., Ltd http://www.sebury.com... -
Page 22: Management Menu Summary Table
Read EM, HID and IC card Restore default settings, operating mode, admin 0000# password and user information unchanged Add fingerprint users Press fingerprint 2 times,… continuously (ID) #, Press fingerprint 2 Specify ID number to add times, …. fingerprint user Sebury Technology Co., Ltd http://www.sebury.com... - Page 23 D0 output RS232-TTL-HEX format. D0 output RS232-TTL-ASCII-8 format. D0 output RS232-TTL-ASCII-10 format. The wiegand output format for (26-66)# reading card can be set from 26-66 bits. Wiegand output without parity check. wiegand output with parity check(EO format). Sebury Technology Co., Ltd http://www.sebury.com...
-
Page 24: Single-Door Mode (Or Interlock Mode) Management Menu Summary Table
Delete 3 Add-cards (or fingerprint). Delete 3 Delete-cards (or fingerprint). Delete 3 Super-open-cards (or fingerprint). Delete 3 Anti-duress-cards (or fingerprint). Delete 3 Authorization-cards (or fingerprint). Delete 3 Normal-open-cards (or fingerprint). Reader mode Single-door mode Interlocked mode Sebury Technology Co., Ltd http://www.sebury.com... - Page 25 Delete card user by reading card 8#(8-digit format number)#, Input 8-digit format card number 8#(8-digit format number)#, … to delete user card. 10#(10-digit format number)#, Input 10-digit format card 10#(10-digit format number)#, … number to delete user card. Sebury Technology Co., Ltd http://www.sebury.com...
- Page 26 Enable anti-crack alarm function Enable anti-crack locked function (1-10)# Set anti-crack wrong time 1-10 Set anti-crack locked time 1-99 (1-99)# minutes Indicator light is always off Red indicator light is always on 1,1,…,# Decrease the brightness of the Sebury Technology Co., Ltd http://www.sebury.com...
-
Page 27: Demo Mode Management Menu Summary Table
1,1,…,# Decrease the keypad tone 2,2,…,# Increase the keypad tone 6 Precautions in use Lead line cannot be connected wrong, especially the power line, otherwise the machine may be burned or not work properly. Sebury Technology Co., Ltd http://www.sebury.com... -
Page 28: Common Troubleshooting
2. The user is disable. Cancel the user disabling mode. the door 3. Incorrect door opening setting. Correct the door opening setting. Reading card 1. Using the unqualified power Change to linear power supply or Sebury Technology Co., Ltd http://www.sebury.com... - Page 29 1. Dryness and broken of finger Moisture the finger or change Can’t recognize skin another finger. fingerprint 2. Pressing area is too small to Press the finger properly as sense to activate required. Sebury Technology Co., Ltd http://www.sebury.com...
Need help?
Do you have a question about the sPress2 and is the answer not in the manual?
Questions and answers