Page 1
Instruction ManualV1.0 BC2019 Access control 1 Product overview 1.1 Product introduction This product uses high-strength zinc alloy housing, Proximity card (EM card, also known as ID card) or password to open the door, built-in highly integrated micro-controller, simple circuit, safe and reliable, economical and durable, suitable for office, villa etc.
1.3 Functional component Indicator light LOGO Card reader antenna Button frame indicator Metal body Metal Key 1.4 Technical parameters > Working voltage: DC12±2V > Static current: ≤20mA > Operating current: ≤100mA > Drive electric lock current: ≤3A > Working environment temperature: -20~50°C >...
Page 3
Brown Electric Bolt lock +12V Black Blue Purple Unlocking time should be set For strike lock: BC2019 opening time should set to be 50mS to the minimum Orange For magnetic lock: BC2019 door opening time shoule set to be 5S...
2.3 Debug Turn on the power supply and test according to the instructions. The debugging will be completed until the lock can be opened correctly by reading card, password and exit button. 3 Basic functions Operating conventions: > A long sound"Di-"indicates correct operation. Three short sounds"Di Di Di"indicate wrong operation .
Page 5
3.2 Change the administrator password Press 0 new password # new password # For example, change administrator password to 999999, press 0 999999 # 999999# 3.3 Add card user Below 3 methods to add a card user, the ID number range is 0-999, the user password is fixed to 6 digits, and it can be operated continuously.
Page 6
3.6 Setting the door opening time 4 0 # Default value, the door opening time is 50 milliseconds. 4 (1-98) # the door opening time is 1-98 seconds. The default is 5 seconds 4 99 # Set the keypad to switch mode, that is, change the lock status every time once door opened For example, set the door opening time to 5 seconds: 4,5#.
Page 7
3.11 Change user’s password 3.11.1 Change password by card * Swipe user card (Old user password) # (New password ) # (New password) # Example, Change user password by card:*,Swipe user card 1234#123456#123456# Note: A initial password 1234 will be generated when adding a new card user. The initial password can’t open the door, Just can be used to change the card user’s password.
Enter Master Operation Mode: *(6 digits administrator code)# Menu Parameters or operation steps Function Default ( new administrator password ) #,( new Modify administrator password 888888 administrator password again)# * read card,…,* Quickly add user card (ID No.)#,read card,…,* Add user card with ID No. (ID No.)#(user pin)#,…,* Add user pin with ID No.