User Access - Cabletron Systems SmartSTACK ELS100 Installation And User Manual

User Access

There are two modes of access to the user interface: READ-ONLY and
READ/WRITE. READ-ONLY access allows you to view switch infor-
mation, but not modify any operating parameters. READ/WRITE access
allows you to both read and modify switch information. You are required
to login with a password before obtaining READ/WRITE access. If no
password is entered (press only the [Enter] key), you are logged in with
READ-ONLY access. No password is configured in the factory default
settings, allowing full READ/WRITE access until a password is set.
To use the console menus, do the following:
1. Type the letter associated with the desired option.
If the selected item is a submenu title, the submenu is displayed
when you enter the letter.
2. Enter the parameter requested by the screen prompt.
If the selected item is a parameter, the system displays a prompt for the
entry of a new parameter value. If the value entered is invalid, a beep
sounds, or a message displays, requesting you to enter a valid value.
22 ELS100-24TX User Interface ELS100-24TX