Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co., Ltd.
Send: FE 01 35 FF
Return: FB 35 AUX_delaytime
Configuration command format:
Command format
Send:FD 01 35 AUX_delaytime FF
Return:FA 35
AUX_delaytime: 1～255, unit is mS, default is 4mS. That is, after receiving the data, the module first pulls down the
AUX pin to wake up the external MCU, and then outputs the serial port data to the external MCU with a delay of 4ms.
6.5.25 Configure serial wake up hold time
Read command format:
Command format
Send: FE 01 36 FF
Return: FB 36 Uart_holdtime
Configuration command format:
Command format
Send:FD 01 36 Uart_holdtime FF
Return:FA 36
Uart_holdtime: 1～255, unit is 10mS, default is 100, That is, after the serial port wakes up, keep 100 * 10ms continuous
wake-up, and then go to sleep after 1000ms.
6.5.26 Configure node information
Read command format:
Command format
Send: FE 05 37 FF
Return: FB 37 Endpoint_info
Configuration command format:
Command format
Send:FD 05 37 Endpoint_info FF
Return:FA 37
Endpoint_info: The 5-byte data format is: endpoint clusterId_H clusterId_L profileId_H profileId_L
Default is: endpoint 0x01, clusterId 0xfeb0, profileId 0x0504
01
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
28
Send: FE 01 35 FF
Return: FB 35 04
Command example
Send:FD 01 35 04 FF
Return:FA 35
Command example
Send: FE 01 36 FF
Return: FB 36 64
Command example
Send:FD 01 36 64 FF
Return:FA 36
Command example
Send: FE 05 37 FF
Return: FB 37 01 FE B0
Command example
Send:FD 05 37 01 FE B0
05 04 FF
Return:FA 37
endpoint
clusterId
clusterId_H
FE
05 04
profileId
clusterId_L
profileId_H
B0
05
E180-Z5812SP User Manual
profileId_L
04
Advertisement
Table of Contents
