JHCTech KMDA-2701 User Manual page 61

Fpt64.efi is a FLASH IC read/write program that loads BIOS data on the motherboard and needs to be
operated in a shell environment.
Please boot the system into the shell environment, enter the directory where the BIOS file is located, and
then use the fpt64.efi program to write the BIOS data you used to upgrade (for example, XXXX.ROM) to
the FLASH IC.
The specific operation instructions are:
Fpt64.efi –f xxxxxxxx.bin
If you need to add other parameters after the instruction, please add: space after the above instruction
NOTE：
1. Only upgrade the BIOS if you encounter problems and need to.
2. To upgrade the BIOS, please use the BIOS read/write program attached to our driver CD or download
the updated version of the program from the relevant website.
3. Do not turn off the power or reboot the system during the upgrade process, so your BIOS data will be
damaged and the system may not boot.
4. After the refresh is complete, you need to manually optimize the LOAD Default.
5. To prevent accidents, please backup the current BIOS data first.
54
User's Manual