Cpu Temp Led Driver; Utility Software Reference - JHCTech KMDA-2701 User Manual

This file contains the information needed to locate the drivers for your motherboard.
Look for the chipset and motherboard model; then browse to the directory and path to begin installing the
drivers. Most drivers have a setup program (SETUP.EXE) that automatically detects your operating
system before installation. Other drivers have the setup program located in the operating system
subfolder.
If the driver you want to install does not have a setup program, browse to the operating system subfolder
and locate the readme text file (README.TXT or README.DOC) for information on installing the
driver or software for your operating system.

4.4 CPU TEMP LED driver

The KMDA-2701 provides temperature showing in LEDs, economic and reliable. Users can monitor the
working state of the CPU according to the display of the LED. Please perform the following operations，
making LEDs work normally.
Find the CPU temperature test tool folder and open it, as shown below;
Run the exe application；
NOTE: Please add the .exe application to the startup item to ensure that the program can run when
power on.

4.5 Utility Software Reference

All the utility software available from this page is Windows compliant. They are provided only for the
convenience of the customer. The following software is fur-nished under license and may only be used or
copied in accordance with the terms of the license. These software(s) are subject to change at anytime
without prior notice. Please refer to the support disk for available software.
Figure 4.5
60
User's Manual