Technical Specifications And Tolerances; Type Plate - Javo Plus User Manual

1 Technical specifications and tolerances

This machine is intended to be used for filling pots automatically with substrate only. The filled pots are then
provided with a drill hole, in which a plant can be placed at the exit conveyor. This machine is meant for processing
pots, substrate and other materials that are described in this manual only. Detailed operation of the machine is
described in section "Operation".
This machine may be used only within the limits for specifications and tolerances of the order, on the
assembly drawing and indicated in this manual. If the machine is used outside these specifications, Javo BV
cannot take responsibility for this machine.
This machine is intended for products as agreed in the order confirmation only. To ensure the proper
operation of this machine, only products with specifications and tolerances as specified in the order may be
used.
Do not use the machine for purposes other than the intended purpose of Javo BV. This can lead to damage
and danger to the operator and its
This machine is CE marked. When placing multiple machines in one line, the entire line must be properly CE
marked before using this machine. Untill proper CE Marking of the line is carried out, commissioning of this
machine is prohibited.
Specifications
Voltage
Machine connection
Power consumption
Switched socket
Weight
Height conveyor
Max. speed
Min. speed
Minimum pot diameter
Maximum pot diameter
Number of potholders
Content substrate bin
1000 revolutions drill motor (motor
axis 24mm)
Drillbush (motor shaft size 19 mm)
Operation
Inverter elevator
Inverter pottrack
Year of construction
Type product
Air (optional)

1.1 Type plate

The type plate is placed onto the main cabinet door.
Version 2015-1
environment.
400Volt 50Hz 3~+N+ PE / 220Volt 60Hz
16A 5pole
3 kW
1x 16A 5 pole
Plus: ±1200 kg, Plus Extra: ±2000 kg
Plus: 820 mm, Plus Extra: 790 mm
Plus: 3840 pots/hour (60Hz), Plus Extra: 1500/63 15/45 ±475 pots/hour
(60Hz)
Plus: 780 pots/hour (13 Hz), Plus Extra: 1500/63 15/45 ±250 pots/hour (13Hz)
Plus: 9 cm, Plus Extra: ±19cm
Plus: 23 cm, Plus Extra: ±38cm* (dependent on pot type)
Plus: 16, Plus Extra: 14
1100 Litre (1,1 m³)
Plus Extra
Plus: Drill shaft 14 mm (up to drill 15 cm)
Loose controls with stop/start/e-stop/reset.
Standard (controlled on electrical cabinet)
Standard (controlled on electrical cabinet)
See type plate
As agreed in the order confirmation.
6 Bar; 250 nL/min.
User Manual Javo Plus en Plus Extra Potmachine
Website: www.javo.se
E-Mail: info@tradgardsteknik.se
4