NeuraLabel 600e Printing Manual page 19

If you need to pull the media out of the CFA, gently pull the media back out with both hands.
It's a good idea to practice loading the media a few times until you are comfortable with the
process.
Proper Loading of Continuous Form Media for NeuraLabel 600e
NeuraLabel 600e Printing Guide
Grasp media with both hands and load
keeping the front edge straight.
Make sure the media stack or roll is straight
with respect to the printer and not crooked
or twisted.
Make sure there is not plastic or box edges
obstructing the media.
Load the media to just inside the lip of the
CFA until the CFA grabs and pulls the media.
The LED will turn green as soon as the CFA
detects the media.
Check to make sure that the load was
straight.
When loaded the leading edge of the media
will be just past the exit side of the CFA
entering the printer.
The load should be straight.
The perforation should be positioned like
that shown in the photo.
- 13 -