Location And Function Of Control Buttons And Knobs On Front Panel - OSEE LMW-230 Series User Manual

B. The right part of rear panel
Power Input Connector
/– (Power) Switch
O
The power is turned on or off.
The monitor is turned on by pressing side–.
Power Input Connector
Total power consumption: 100-240V AC, 50-60Hz.
Equipment power consumption: 40W.
A power source with the capacity of more than 45W is recommended.
4.4

Location and Function of Control Buttons And Knobs On Front Panel

SDI1 SDI 1 switch key
SDI2 SDI 2 switch key
LINE1 VIDEO1 switch key
LINE2 VIDEO2/YC/YPBPR switch key
DVI-I VGA/DVI/HDMI switch key
F1 Related to the menu page of user config 3/5 "F1 BUTTON".
MENU Call out Main Menu. Or make the Main Menu disappear when it is on.
DOWN/F2 Following Three status:
No any Menu: F3, Related to the menu page of user config 3/5 "F2 BUTTON".
Main Menu:
Volume/Brightness/Contrast/Chroma/Phase Menu: show current value
UP/F3 The following Three status:
No Menu: Related to the menu page of user config 3/5 "F3 BUTTON".
Main Menu: Select the Pre Item on the Menu.
Volume/Brightness/Contrast/Chroma/Phase Menu: Decrease current value
ENTER The following two status:
No any Menu: Switch between Volume/Brightness/Contrast/Chroma/Phase Menu
Page.
Main Menu: Press the key to enter the adjustable menu page.
POWER Power on/off key
NOTE: Press ENTER 10 seconds and the default setting menu will display. And it will return
back to default setting.
LMW-230 SERIES LCD MONITOR
Select the next Item on the Menu.
- 9 -
Power Switch
User Manual