Table of Contents
Advertisement
CHAPTER 1
INTRODUCTION
Welcome to Cabletron Systems 7F06-02 FDDI SmartSwitch Interface
Module User's Guide. This guide is a simple reference for installing
and using the 7F06-02 Module. Before installing this module, you
should carefully read through this manual to gain a full
understanding of its capabilities.
The 7F06-02 Module is a two port FDDI module. This module
connects to a network and the 7X00 SmartSwitch™ Control
Module in the 7C03,7C04 or 7C04-R MMAC SmartSwitch via a
SmartSwitch bus.
1.1 USING THIS MANUAL
Chapter 1, Introduction, discusses the capabilities and special
features of Cabletron Systems 7F06-02 Module. This chapter also
includes a list of related manuals.
Chapter 2, Network Requirements, contains a list of available
FPIMs and the network requirements that should be considered
before installing the 7F06-02 Module.
Chapter 3, Installation/Removal, contains instructions for
installing and removing the 7F06-02 in the 7C03 MMAC
SmartSwitch, the 7C04 Workgroup SmartSwitch or the 7C04-R
Workgroup SmartSwitch.
Chapter 4, Troubleshooting, contains instructions for using
®
LANVIEW
(Cabletron Systems built-in diagnostic and status
monitoring system).
Chapter 5, Technical Specifications, provides detailed information
about the physical characteristics of the 7F06-02 Module.
1-1
Advertisement
Table of Contents
