NETWORK REQUIREMENTS
2.1.3 FPIM-05 and FPIM-07
The FPIM-05 and FPIM-07 provide a Single-mode fiber connection.
The FPIM-05 uses a MIC style connector and the FPIM-07 uses an
SC type connector. The specifications for both devices are listed in
Table 2-4.
Parameter
Transmitter Peak
Wave Length
Spectral Width
Rise Time
Fall Time
Duty Cycle
Bit Error Rate
The link distance is up to 40 kilometers (max) and 25 kilometers
(typical) on single mode fiber-optic cable as specified by ANSI
SMF-PMD.
2-4
Table 2-4. FPIM-05 and FPIM-07 Specifications
Typical
Minimum
1300 nm
1270 nm
60 nm
-
3.0 nsec
2.7 nsec
2.5 nsec
2.2 nsec
50.1%
49.6%
Better
than 10
-10
Maximum
1330 nm
100 nm
5.0 nsec
5.0 nsec
50.7%