Bunn Sure Immersion 220 Installation & Operating Manual page 31

9. Following the steps to add a Cleaning Tablet.
a. Open door.
b. Insert Cleaning Tablet into Funnel.
c. Close door.
10. Press Continue button.
11. The operator will be shown a progress bar
with the message "Please Wait... Cleaning".
When finished, the screen will return to the
original startup screen.
NOTE: If at any time during the cleaning cycle,
the process needs to be halted, press the
Stop button.
The machine will reset, and return to the
original startup screen.
Touch Screen
With internal cleaning complete, the operator will
be prompted with a new screen to "Begin Cleaning
Touch Panel".
1. Press Start button.
2. Once the Start button is pressed, the Touch
Screen is deactivated for 15 seconds.
During this time, the screen will change and
provide a countdown allowing it to be cleaned
without activating any other operations.
NOTE: Clean the screen using the cloth provided
in the cleaning products. The Surface should
be free of debris and dry to the touch when
completed.
Once the allotted time for touch screen cleaning
has expired, the system will reset, and return to
the home screen.
CARE AND CLEANING
9
11
2
31
10
1
continued >