Bunn Sure Immersion 220 Installation & Operating Manual page 13

► BUNNLink Models Only or Purchase Required. If you experience any issues with Activation, contact a
BUNNlink administrator: bunnlink@bunnlink.com.
1. Access MACHINE SETTINGS and scroll down to the
BUNNLink tab. Select Activate Wifi Setup button.
2. Access the Wi-Fi Setting page on the device you will be
using; tablet, laptop, or phone. From the Wi-Fi Setting
page locate the Wifi board serial number.
NOTE: This should be on display in the network search area.
NOTE: If the Wifi board serial number is not present, power
cycle the machine three times. Wait five seconds between
cycles to ensure the board has completely shut off.
3. Select the Wifi board serial number. Enter Bunn123! in the
password text field.
4. After a connection to the network has been made
open, open the web browser of your choice
(Google, Safari, Mozilla).
5. Enter 192.168.1.1 in the web address bar
6. On the BUNN login page enter the username
BunnService.
Then, enter Bunn123! in the password text field and
press the log in button
7. From the home page select settings from the menu bar.
8. From the Drop Down Menu, choose the desired network
to join.
9. Enter the password for the specific networks and
press apply.
10. Verify the gateway has been connected, the machine serial
number, signal strength, and cloud link by accessing the
BUNNlink tab from machine settings on the unit.
11. See page 14 for BUNNLink Product Registration.
BUNNlink LTE ACTIVATION
13
1
3
5
6
8
9