Bunn Sure Immersion 220 Installation & Operating Manual page 15

4. The next screen shown after "Grinding" is
"Immersing" where brew water is added to
the ground beans.
5. The next screen after "Immersing", is the
"Brewing" screen. The the ground beans and
brew water is allowed to sit permitting the
flavors to bloom.
6. The next screen shown to the user is the
"Dispensing" screen. The user's selection is
now being dispensed.
7. If the "STOP" button has been pressed, the
user will be presented with a new screen
that indicates that the unit has "Paused"
(cancelling) the beverage selection.
8. After pressing the "RESET" button, the user will
be presented with a new screen indicating that
the machine is "RESETTING".
NOTE: Do not remove your cup from the drip
tray while the machine is resetting. This is a
system reset & the machine will perform a reset
cycle.
NOTE: liquid may be dispensed.
The user will then be returned to the original
selection screen.
OPERATING INTERFACE
15
continued >