Bunn Sure Immersion 220 Installation & Operating Manual page 11

8. Close the door, then press and hold the BUNN
logo for 3 seconds until SERVICE ACCESS
appears on the display.
9. In the lower left corner of the SERVICE
ACCESS screen, press and hold the Advance
Paper button.
NOTE: It will stop when there is a sufficient
amount of Filter Paper on the take-up roller.
10. Press the BUNN logo icon button at the bottom
of the screen to return to the home screen.
1. The machine Serial Number is found on the
SERVICE ACCESS screen in the upper left
corner.
2. The Software Version is shown in the upper
right corner of the SERVICE ACCESS screen.
3. The Information Bar located at the bottom
of the home screens provides status of active
notice information.
FILTER PAPER INSTALLATION
8
TOUCH SCREEN
11
9
10
1
3
2