Datatool S4 Series Training Manual page 7

Led mounting methods and positions
Where possible the position of the system LED should be agreed with the owner, prior to installing.
Method 1.
Method 2
.
Warning: When fitting into an LED tail light take care not to damage LED PCB
Method 3.
The alarm components should be located to ensure the maximum time is required for the thief to access the system.
Other factors such as the storage of customer's personal belongings and other equipment such as intercoms, chain oilers,
etc should also be considered.
Only when the main unit positions have been established, should the wiring be investigated.
Planning the wiring
7