TVS Apache RTR 160 4V Owner's Manual page 32

HANDLE BAR RIGHT SIDE
6 5
1
2
1. Head lamp switch
Head lamp switch has two positions. Working of
switch at these positions are as followed:
OFF: The head lamp will be turned 'OFF' but
other lamps like DRL, speedometer back
illumination, tail lamp and number plate
lamp glows when the switch is positioned
at ' ' position with ignition 'ON'.
4
3
ON: The head lamp low beam glows along
with all other lamps when the switch
is positioned at '
ignition 'ON'. The headlamp high beam
can be obtained only after the engine
starting.
Note
The DRL will act as a FPL once the headlamp is turned
'ON'.
2. Electric starter switch
Ensure the transmission is in neutral or else press
the clutch lever before engaging the electric starter
switch ' '.
3. Throttle grip
It controls the fuel-air mixture supplied to the engine,
which regulates the engine speed. Rotate the throttle
grip in counter-clockwise from its idle position to
increase the engine speed and vice-versa to reduce.
Note
Ensure to turn 'ON' the engine cut-off switch before
starting the vehicle. Release the electric starter switch
immediately after pressing.
' position with the
29
29