Table of Contents
Advertisement
Carefully remove the front wheel during puncture
/ tyre replacement to prevent toner ring damage
/ bend.
Keep the wheel in such a way that the toner
ring is facing upwards.
Always use recommended brake fluid. Use fresh,
clean brake fluid.
Use only the recommended make, type and size
of tyre (ABS tuned with tyre specified by the TVS
Motor Company).
Don'ts
Do not use non-standard tyres.
Do not pump the brakes. Apply the brakes
continuously.
Do not ignore any warning lamp on speedometer.
Do not adjust the wheel speed sensor air gap
your self.
Do not attempt to correct the toner ring teeth by
bending manually or by using any other method.
Do not use different toner ring.
Do not insert any metallic parts near wheel speed
sensor.
Do not test the ABS on road!!, but use ABS (it is
already tested).
Do not use non-genuine spares like pads,
discs, tyres etc.
Do not try to service HECU or open to separate
parts.
Do not disengage the ABS by removing the ABS
coupler.
Note
Incase of ABS failure, the braking system will work like
a non ABS braking system and provides normal stopping
distance.
This motorcycle is equipped with ABS on front wheel.
For repair or replacement of front wheel tyres (tubeless)
please contact nearest TVS Motor Company Authorised
Main Dealer / Authorised Dealer.
As a general riding practice it is advisable to apply more
front brake and less of rear brake.
Use of non-genuine brake pads, tyres, disc etc. leads to
poor braking performance and unsafe riding conditions.
Never open HECU on your own, it is a very sensitive
part of ABS and needs to be handled only by the trained
personnel. Contact your nearest TVS Motor Company
Authorised Main Dealer / Authorised Dealer.
15
15
Hide quick links:
Advertisement
Table of Contents
