Auto Pc Adjustment - Eiki LC-XB30 Owner's Manual

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to
your computer. Auto PC Adjustment function can be operated as follows.
Direct Operation
The Auto PC adjustment function can be operated directly by pressing
the AUTO PC button on the remote control.
Menu Operation
Auto PC Adj.
1
Press the MENU button to display the On-Screen Menu.
Press the Point 7 8 buttons to move the red frame pointer
to PC Adjust Menu icon.
2 Press the Point button to move the red frame pointer to
d
Auto PC Adj. icon and then press the SELECT button twice.
This Auto PC Adjustment can be also executed by pressing
the AUTO PC button on the remote control.
To store adjustment parameters
Adjustment parameters from Auto PC Adjustment can be
memorized in this projector. Once parameters are memorized, the
setting can be done just by selecting Mode in the PC System
Menu (p28). See "Store" on page 31.
✔
Note:
• Fine sync, Total dots and Picture Position of some computers can not be fully
adjusted with this Auto PC Adjustment function. When the image is not provided
properly with this operation, manual adjustments are required. (p30, 31)
• The Auto PC Adjustment cannot be operated when 480i, 575i, 480p, 575p,
720p,1035i, or 1080i is selected in the PC System Menu(p28), or when the signal
is coming from DVI-terminal.
Remote Control
AUTO PC button
PC Adjust Menu
PC Adjust Menu icon
Move the red frame pointer to
the Auto PC Adj. icon and
press the SELECT button.
"Wait a moment!" message
appears while Auto PC
adjustment is in process.
Computer Input
29