Keystone Adjustment; Picture Freeze Function; No Show Function - Eiki LC-XB30 Owner's Manual

Keystone Adjustment

If a projected picture still has keystone distortion after pressing the AUTO SETUP button on the top control or the AUTO
SET on the remote control, correct the image manually as follows:
1 Press the KEYSTONE button on the remote control or select
Keystone in the Setting Menu (p42). The keystone dialog
box appears.
2 Correct keystone distortion by pressing the Point
buttons.
Keystone adjustment can be memorized. (p42)
• The arrows are white when there is no correction.
• The arrows disappear at the maximum correction.
• The direction of the arrow being corrected turns red.
• If you press the KEYSTONE button on the remote control once more
while the keystone dialog box is being displayed, the keystone
adjustment will be canceled.
Reduce the upper width
with Point e e button.

Picture Freeze Function

Press the FREEZE button on the remote control to freeze the
picture on the screen. To cancel Freeze function, press the
FREEZE button again or press any other button. (p11)

No Show Function

Press the NO SHOW button on the remote control to black out the
image. To restore to normal, press the NO SHOW button again or
press any other button. When a projected image is captured and
set as "User" in the Logo item in the Setting Menu (p44), the
screen changes each time you press the NO SHOW button as
follows.
black out ➜ the captured image ➜ normal ➜
e e d d 7 8
Reduce the lower width
with Point d d button.
• • • • •
Remote Control
Reduce the left part with
Point 7 button.
Remote Control
The message disappears after 4 seconds.
Basic Operation
e e d d 7 8
POINT buttons
KEYSTONE button
Reduce the right part with
Point 8 button.
FREEZE button
NO SHOW button
25