Eiki LC-XB30 Owner's Manual page 31

Display area
Press the SELECT button to display the Display area dialog box.
Select the resolution at the Display area dialog box.
Display area H
Adjust the horizontal area displayed by this projector. Press the
Point 7 8 buttons to decrease/increase the value and then press
the SELECT button.
Display area V
Adjust the vertical area displayed by this projector. Press the Point
7 8 buttons to decrease/increase the value and then press the
SELECT button.
Full screen
With this function on, SXGA image is fully displayed at 4 : 3 aspect
ratio. It is displayed at 5 : 4 aspect ratio with this function off.
Reset
To reset the adjusted data, select Reset and press the OK button.
The confirmation box will appear and then select [Yes]. All
adjustments return to their previous figures.
Mode free
To clear adjustment data previously set, move the red frame
pointer to the Mode free icon and then press the SELECT button.
Move the red arrow pointer to the Mode that you want to clear
and then press the SELECT button.
Store
To store adjustment data, move the red frame pointer to the Store
icon and then press the SELECT button. Move the red arrow
pointer to any of Mode 1 to 5 in which you want to store and then
press the SELECT button.
Quit
Exit the PC Adjustment Menu.
✔
Note:
Auto PC Adjustment, Display area, Display area (H/V), and Full screen cannot be
selected when 480i, 575i, 480p, 575p, 720p, 1035i, or 1080i is selected in the PC
System Menu (p28).
Press the SELECT button at
the Display area icon and the
Display
appears.
To store adjustment data
This Mode has parameters being stored.
Vacant Mode
Show values of "Total
dots," "Horizontal,"
"Vertical," "Display area
H," and "Display area V."
To clear adjustment data
Close this dialog box.
Computer Input
area dialog box
Display area
31