Quectel RG50-Q Series User Manual page 14

USB
PCIe to USB
PCIe Configuration
Switch
SDIO Configuration
Switch
RGMII Configuration
Switch
Codec Configuration
Switch
Audio
(U)SIM
SD Card
Main UART
Debug UART
Status Indicator
Module TE-A
PHY TE-A
Wi-Fi TE-A
AP TE-A
5G_EVB_User_Guide
J1101
J1601
S1501
S2501
S1801, S1802
S2801
J0802
J0801
J0901
J1401
J1402
J1301
J2002
J2003
D0201
D0202
D0203
D0204
D0205
J0101, J0102
J1901, J1902
J0701, J0702
J2101, J2102
Used to reset the module
USB Type C interface
PCIe to USB interface, not supported by default
Used to configure the module communication with
different devices via PCIe signals
Used to switch between SD card and eMMC
Used for RGMII configuration
Used for codec configuration
Codec board TE-A connector
Designed for loudspeakers
Audio jack for earphone
(U)SIM1 card connector
(U)SIM2 card connector
SD card connector
MAIN_UART port for data communication
DBG_UART port for debugging
Power supply on/off indicator, indicating whether
the module's power supply is on or off.
Module operation status indicator, indicating
whether the module is powered on.
Net mode indicator, indicating NET_MODE status
of the module.
Net status indicator, indicating NET_STATUS
status of the module.
Sleep status indicator, indicating SLEEP status of
the module.
Module TE-A connectors
PHY TE-A connectors
Wi-Fi TE-A connectors
AP TE-A connectors
5G/LTE-A Module Series
5G EVB User Guide
13 / 38